2020 GMC Yukon Trim Levels in Saginaw MI

If this is your first time purchasing a vehicle, then you might not be aware that each model you see in our showroom likely comes in several distinct trim levels. Depending on your preferences when it comes to comfort, safety, and performance, you’ll have a few decisions to make to ultimately choose the edition that’s right for you. So, if you have your eye on the 2020 GMC Yukon, allow the team at McDonald GMC to tell you more about what this large SUV brings to the table.

Comfort

We’ll get this overview underway by checking out some of the amenities at your disposal within the cabin. The 2020 Yukon SLE starts off with a standard leather-wrapped steering wheel, premium cloth upholstery, and a 10-way power driver’s seat, demonstrating just how much you stand to gain even when you stick with the base model. That being said, those who move up to the SLT Standard Edition will be provided with leather-appointed chairs, whereas the SLT and Denali trims raise the stakes with a 12-way power-adjustable seat for the person at this GMC’s helm. However, no matter which grade you end up with, you can take advantage of standard tri-zone automatic climate control, steering wheel-mounted controls, and available all-weather floor mats.

Safety

Next, we’ll examine which safety features you’ll find across the spectrum of 2020 GMC Yukon trim levels. Squeezing into a spot at the Saginaw Children’s Zoo will soon be a cinch, as Front and Rear Park Assist1 is included universally, so you’ll receive audible alerts if you’re getting too close to a stationary object. However, if you’re hoping to access a few more intelligent amenities, consider moving up to the Yukon SLT, as this edition has standard Lane Change Alert with Side Blind Zone Alert1 and Lane Keep Assist with Lane Departure Warning1 to keep you on a straight and sure path. In addition, the SLT Standard Edition, SLT, and Denali trims all offer Automatic Emergency Braking1 as a standard feature to provide an extra line of defense under certain conditions.

Performance

What better way to cap off this trim overview than by putting the GMC Yukon through its paces? Those who take home the SLE, SLT Standard Edition, or SLT model will have authority over 355-hp and 383 lb.-ft. of torque, courtesy of the standard 5.3L V8 engine. When paired with the available HD Trailering Package, this raw strength translates into an 8,500-lb. towing capacity2, so you can easily haul a camper with you. If you’re looking to wield a bit more muscle, then you’ll want to go with the Denali trim’s 6.2L V8 powertrain for a staggering 420-hp and 460 lb.-ft. of torque. As if that weren’t enough, you’ll also gain standard Magnetic Ride Control to further improve the smoothness of your morning commute.

We hope that this brief introduction to 2020 GMC Yukon trim levels in Saginaw, MI, has inspired you to swing by McDonald GMC to get a closer look at this exceptional piece of machinery. Just enter 5155 State St, Saginaw, MI 48603, into your GPS and you’ll be here in no time!

Disclaimers:

  1. Safety or driver assistance features are no substitute for the driver's responsibility to operate the vehicle in a safe manner. The driver should remain attentive to traffic, surroundings and road conditions at all times. Visibility, weather, and road conditions may affect feature performance. Read the vehicle's owner's manual for more important feature limitations and information.
  2. Yukon’s 8,500-lb rating requires short wheelbase 2WD with 5.3L EcoTec3 V8 engine and HD Trailering Package. Before you buy a vehicle or use it for trailering, carefully review the trailering section of the Owner’s Manual. The weight of passengers, cargo and options or accessories may reduce the amount you can tow.

McDonald GMC - We’re Saginaw’s Choice GMC Dealer

At McDonald GMC, our entire team works together to provide you with the ultimate GMC shopping experience. We are here to exceed your expectations, deliver the best service possible, and make car shopping fun again.

McDonald GMC

5155 State St, Saginaw, MI 48603

Contact Us

Hours

Monday 9:00AM - 8:00PM
Tuesday 9:00AM - 6:00PM
Wednesday 9:00AM - 6:00PM
Thursday 9:00AM - 8:00PM
Friday 9:00AM - 6:00PM
Saturday 9:00AM - 3:00PM
Sunday Closed
lunch at noon -1pm
Monday 7:30AM - 5:30PM
Tuesday 7:30AM - 5:30PM
Wednesday 7:30AM - 5:30PM
Thursday 7:30AM - 5:30PM
Friday 7:30AM - 5:30PM
Saturday 8:00AM - 2:00PM
Sunday Closed
you break it we fix it
Monday 7:30AM - 5:30PM
Tuesday 7:30AM - 5:30PM
Wednesday 7:30AM - 5:30PM
Thursday 7:30AM - 5:30PM
Friday 7:30AM - 5:30PM
Saturday 8:00AM - 1:00PM
Sunday Closed